|
 Phenix Motor Controllers are designed for industrial environments and can be programmed to fit almost any motor control needs. Settings for the motor controller are programmed using Phenix Programmer Software and are then transfered into an infrared remote through the USB interface, model 9245, or from the PC screen, model 9211.
Adjust the amount of time the motor runs forward, reverse, or sits idle. Motor controllers with current sensing can be programmed to stop when the motor reaches a load threshold, allowing for detection of a physical limit or workload. A settable current check delay provides motor start current to be differentiated from load current. Also, a programmable deadband prevents motor damage when switching from forward to reverse. |
|
|
|
|
- Fully Programmable
- Forward and Reverse
- 3-24v DC Motors
- Up to 5A Motors
- Current Sensing
- Speed Control
|
|
|
